手机网站
全国统一服务热线: 400 800 5549
产品中心 Products
KP 44

KP 44

项目介绍:

Polypropylene-Film-Capacitor

with axial leads

for precision application

 

事宜人群:
产品信息

Characteristic

Good long-time constancy

Low dielectric losses up to high frequencies

Low self inductance

RoHS Compliant 2011/65/EG (recall of 2002/95/EG)

 

Dielectric: Polypropylene-Film

Electrodes: Metal foil

Coating: Plastic wrapped, epoxy resin sealed

Leads: Tinned wire Temperature range: -40°C to +85°C

IEC test classification: 40/085/21 acc. EN 60068-1

Insulation resistance Ri :  30 000 M

Measuring procedure: 100Vdc, 1 Min., 20°C

 

Capacitance tolerance: for CR  470 pF: 20%(M), 10%(K), 5%(J), 2%(G), 1%(F) for 100 pF  CR < 470 pF: 20%(M), 10%(K), 5%(J), 2%(G) for CR < 100 pF: 20pF(M), 10pF(K), 5pF(J), 2pF(G)

Capacitance change vs. temperature for CR  470 pF: -(200  100) * 10-6 /°C

Test voltage (between terminations): 2 * UR, 2 s (Approval test: 1 Min.)

Test voltage (between terminations and case): 2 * UR, 1 Min.

Derating of voltage: For temperatures above 75°C and ACApplication> 60 Hz a derating factor of 1,25% per degree °C must be applied

Pulse rise time dv/dt: 1 000 V/µs

Resistance to soldering heat: Bath temperature max. 260°C, duration max. 5 s, method Tb acc. IEC 60068-2-20

 

Hot Products / 热卖产品 More
2015 - 12 - 15
产品制造工艺符合MIL 18546和IEC 115的要求,此散热器表面安装设计可实现实现最大散热性能。• 高功率容量• 绕线达最大脉冲能力• 阻值范围:R005 ~ 100K• 接受定制• 符合RoHS
2015 - 10 - 22
内置高CMR光电耦合器内置短路保护器(定时器操作和复位电路)调整时间来控制短路检测的能力输入输出隔离电压:2500vrms 1min
2015 - 10 - 22
光电耦合器的输入和输出之间的电气隔离(维索= 2500vrms 1min)双电源驱动技术内置短路保护电路(带故障的引脚)TTL兼容的输入接口
Copyright ©2011 - 2015 上海井诚机电设备有限公司
分享  :