Characteristic:
For high current application
Self-healing, small sizes
Low dielectric losses, low self inductance
RoHS Compliant 2011/95/EC (recall of 2002/95/EC)
Dielectric: Polypropylene-Film
Electrodes: Metal foil and metallized plastic-film, internal series-connection
Coating: Plastic wrapped, epoxy resin sealed
Leads: Tinned wire
Temperature range: -55°C to +100°C
IEC test classification: 55/100/56 acc. EN 60068-1
Capacitance tolerance: 20%(M), 10%(K), 5%(J)
Insulation values Ri resp. : Ri 100 000 M for CR 0,33 µF 30 000 s for CR > 0,33 µF
Measuring procedure: 100 Vdc, 1 Min., 20°C
Test voltage (between terminations): 1,6 * UR, 2 s (Approval test: 1 Min.)
Test voltage (between terminations and case): 2 * UR, 1 Min.
Derating of voltage: A voltage derating factor of 1,5% per 1K must be applied from 85°C for DC application and from 75°C for AC application >60 Hz
AC-Voltage at 60 Hz: 1,4 * URMS + UDC UR
Resistance to soldering heat: Bath temperature max. 260°C, duration max. 10 s, method Tb acc. IEC 60068-2-20