Characteristic
Small sizes, self-healing
Low dielectric losses, low self inductance
up to 1 600 Vdc (700 Vac)
RoHS Compliant 2011/95/EC (recall of 2002/95/EC)
Dielectric: Polypropylene-Film Electrodes: Vacuum deposited aluminium
Coating: Plastic wrapped (white or yellow), epoxy resin sealed special colours by request
Leads: Tinned wire Temperature range: -55°C to +100°C Tests: acc. EN 60384-16
IEC test classification: 55/100/56 acc. EN 60068-1
Insulation values Ri resp. : Ri 100 000 M for CR 0,33 µF 30 000 s for CR > 0,33 µF Measuring procedure: 100 Vdc, 1 Min., 20°C
Capacitance tolerance: 20% (M), 10% (K), 5% (J)
Test voltage (between terminations): 1,6 * VR, 2 s (Approval test: 1 Min.)
Test voltage (between terminations and case): 2 * VR,1 Min.
Derating of voltage: A voltage derating factor of 1,5% per 1K must be applied from 85°C for DC application and from 75°C for AC application >60 Hz AC-Voltage at 60 Hz: 1,4 * VRMS + VDC VR
Resistance to soldering heat: Bath temperature max. 260°C, dVRation max. 10 s, method Tb acc. IEC 60068-2-20