手机网站
全国统一服务热线: 400 800 5549
产品中心 Products
CKS

CKS Rotary switch

项目介绍:

Switch Rating: 150mA@250V ac/dc resistive load 1A @ 24V dc
Life: >10,000 Cycles
Operating Temperature: -30ºC to +85 ºC
Proof Voltage: 1,500Vac (Initial)
Insulation Resistance: >999 MΩ at 500Vdc (Initial)
Contact Resistance: <20 mΩ (initial)
Operating Torque (nominal) Standard 10.5 ± 1 N cm
Light Action 5.5 ± 0.5 N cm
End Stop Torque (nominal): 0.80 Nm
Moulding Material: Polyamide 6.6 G.F. V0 RATED
Contact/Terminal Material: Brass CZ108 Ag Plated 

事宜人群:
产品信息

Front panel and spindle sealed IP67, high quality single deck multi-pole switches. Made in UL-V0 material. The switch exhibits the same form, fit and electrical ratings as existing CK types.

o Made in UK
o Cost effective single wafer switch
o Moulded 27.5mm diameter
o Standard 30º indexing
o Solder or Printed Circuit Board Terminals
o Up to 4 poles per switch
o Maximum 12 positions
o Moulded in UL94 V0 material.
o Optional reinforcement ring.
o Shorting (make before break 30º indexing only) or non shorting (break before make) contacts. o Special options: 60ºor 90º indexing, continuous rotation. Fixed stop,gold flash or gold plated contacts, and spindles with special flats.
o CKS same form, fit & function to the CK range
o Dampened indexing & reduced shaft play gives smooth feel.
o Front panel sealed to IP66 –protected against powerful water jets
o Front panel sealed to IP67 – protected against the effects of temporary immersion in 1 meter of water. (ancillaries required)


Hot Products / 热卖产品 More
2015 - 12 - 15
产品制造工艺符合MIL 18546和IEC 115的要求,此散热器表面安装设计可实现实现最大散热性能。• 高功率容量• 绕线达最大脉冲能力• 阻值范围:R005 ~ 100K• 接受定制• 符合RoHS
2015 - 10 - 22
内置高CMR光电耦合器内置短路保护器(定时器操作和复位电路)调整时间来控制短路检测的能力输入输出隔离电压:2500vrms 1min
2015 - 10 - 22
光电耦合器的输入和输出之间的电气隔离(维索= 2500vrms 1min)双电源驱动技术内置短路保护电路(带故障的引脚)TTL兼容的输入接口
Copyright ©2011 - 2015 上海井诚机电设备有限公司
分享  :